Author Topic: Magnetic V-Gate motor (Read 77 times)

CG · « **on:** June 20, 2019, 02:34:56 pm »

Escape velocity achieved.
The standard sticking point to the success of this machine was in fact the "STICKING POINT".
Here I achieved success in conquring the "STICKING POINT".
Too bad it couldn't be made into a rotating machine without any external power.

https://youtu.be/llBHPuHwR1E

CG · « **Reply #1 on:** June 21, 2019, 01:51:04 pm »

Version2

https://youtu.be/p7-XOsG76ew

CG · « **Reply #2 on:** June 22, 2019, 02:39:56 pm »

https://youtu.be/suGPVOU1DO8

CG · « **Reply #3 on:** June 23, 2019, 03:43:56 pm »

Here is my proposed rotary V-gate design as an actual motor. It's impossible to work but it's fun trying.
When one magnet is at the start of a V-gate the other two magnets are in the middle and at the end of theirs. Same principle as the "steel core alternator".

https://youtu.be/2hJ2yPXj0D0

Caleb · « **Reply #4 on:** June 24, 2019, 10:56:47 am »

Now if you can get a wind turbine to push the magnets over the hump you could generate electricity.

CG · « **Reply #5 on:** June 24, 2019, 11:05:10 am »

WOW!

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

CG · « **Reply #6 on:** June 24, 2019, 02:20:53 pm »

Took 30 minutes to build, test and fail. Just as we figured. 😌

ALTERNATIVE ENERGY FORUM - etc.

Author Topic: Magnetic V-Gate motor (Read 77 times)

CG

Magnetic V-Gate motor

CG

Re: Magnetic V-Gate motor

CG

Re: Magnetic V-Gate motor

CG

Re: Magnetic V-Gate motor

Caleb

Re: Magnetic V-Gate motor

CG

Re: Magnetic V-Gate motor

CG

Re: Magnetic V-Gate motor