Author Topic: Magnetic V-Gate motor  (Read 54 times)

0 Members and 0 Guests are viewing this topic.

Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Magnetic V-Gate motor
« on: June 20, 2019, 02:34:56 pm »
Escape velocity achieved.
The standard sticking point to the success of this machine was in fact the "STICKING POINT".
Here I achieved success in conquring the "STICKING POINT".
Too bad it couldn't be made into a rotating machine without any external power.

https://youtu.be/llBHPuHwR1E
« Last Edit: June 21, 2019, 09:33:13 pm by CG »

Share on Facebook Share on Twitter


Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Re: Magnetic V-Gate motor
« Reply #1 on: June 21, 2019, 01:51:04 pm »

Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Re: Magnetic V-Gate motor
« Reply #2 on: June 22, 2019, 02:39:56 pm »

Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Re: Magnetic V-Gate motor
« Reply #3 on: June 23, 2019, 03:43:56 pm »
Here is my proposed rotary V-gate design as an actual motor. It's impossible to work but it's fun trying.
When one magnet is at the start of a V-gate the other two magnets are in the middle and at the end of theirs. Same principle as the "steel core alternator".


https://youtu.be/2hJ2yPXj0D0
« Last Edit: June 23, 2019, 06:23:51 pm by CG »

Offline Caleb

  • Hero Member
  • *****
  • Posts: 1009
Re: Magnetic V-Gate motor
« Reply #4 on: June 24, 2019, 10:56:47 am »
Now if you can get a wind turbine to push the magnets over the hump you could generate electricity.

Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Re: Magnetic V-Gate motor
« Reply #5 on: June 24, 2019, 11:05:10 am »
WOW!

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Offline CG

  • Administrator
  • Hero Member
  • *****
  • Posts: 2513
Re: Magnetic V-Gate motor
« Reply #6 on: June 24, 2019, 02:20:53 pm »
Took 30 minutes to build, test and fail. Just as we figured.  😌